Paint coating measurements are the most important measurement for assessing vehicles and determining accidental damage.

In the past, you could determine the thickness of paint coating only by recording it with conventional gauges and drawing your own graphs or tables – usually by hand. You had to fill in the vehicle and customer data yourself before printing it all on the company paper of the inspection organization.

A close and long cooperation with lacquer experts and authorities of the industry confirmed the increasing effort made to develop a testing system that meets all the requirements of an expert –The CarCheck system.
The goal was to present not only a highly accurate paint coating measuring gauge, but also an elaborate measuring system offering a software-based solution for analysis and documentation.
That way, a revolutionary measuring system has been created. The CarCheck system, consisting of the CarCheck gauge and the CarCheck software.
The CarCheck gauge however, is no ordinary coating thickness measuring device. Clear measuring instructions in the display guide you through the complete measuring process – the measuring of a complete automobile at all the spots, relevant to the damage.

Choose between a basic measuring mode (3 measurements per vehicle part) and an intensive measuring mode (6 measurements per vehicle part). The readings are saved in the gauge and can be transmitted to the CarCheck documentation and administration software using the wireless USB interface.
The intuitive job wizard makes the use of the CarCheck software as easy as child play. It guides you through the whole process, starting from creating the measuring task with the gauge, to printing the completed measuring log. After entering company and user data, you can specify the vehicle and all its relevant characteristics, such as the vehicle identification number, and assign the owner to it.

As soon as this data is available, the documentation is created automatically. There is even room for personal assessments and comments.

This documentation provides you with a tabular analysis of the coating thickness measurements, a schematic image of the vehicle type, and all necessary vehicle and customer data. Your company address and logo in combination with your digital signature legalize these documents as a binding protocol.

In addition to the usual individual measurement, the CarCheck system enables you to choose between various menu driven measurement programs for various vehicle types.

Furthermore, you can select the measuring mode you need for each vehicle type, such as limo, station wagon, convertible or van. Choose between Basic measurement with 3 measurements per measuring object (Fender, hood etc.) or Intensive measurement with 6 measurements per measuring object. The gauge shows you the exact spot to be measured in its display.

After taking the measurement, the gauge switches to the next measuring spot automatically. That way, all measurements are stored within the gauges memory at the end of the measuring procedure.

The wireless communication between gauge and PC is achieved via the provided USB adapter. The measurements are safely stored within the gauges memory until you delete them using the special CarCheck software included in the scope of supply. The gauge’s menu is designed in the same easy and intuitive way as the menu of a modern cell phone, allowing safe and intuitive operation of a measuring system that meets all the requirements of today’s generation. The fact, that the administration and analysis software included resembles the commonly used MS office applications, supports the handling of the system even more.

 

PRODUCT HIGHLIGHTS:
 

• Fully automated, menu driven measuring system, providing individual measurements
• Detailed documentation thanks to analysis and administration software
• High measuring range of up to 5 mm
• Compact gauge, pre-programmable on the PC beforehand
• No time consuming calibration
• Rugged measuring system
• Easy to use
• 3 years warranty

STANDARD SCOPE OF SUPPLY:

• CarCheck Gauge
• Measuring probe Dual Fe 5mm/NFe 5mm
• 1m adapter cable for the external probe
• Zero reference plates Fe und NFe
• 2 AA batteries 1,5 V alkaline
• Soft pouch with belt clip
• Quick start guide and instruction manual
• Certificate of inspection
• CarCheck documentation and administration software
• USB – wireless interface adapter for bidirectional data transfer between gauge and PC
• Case for transport and storage

DOWNLOADS:

Quick Start Guide
Instruction Manual
Example Measuring Log
Technical Data

SPECIFICATIONS:

Buy Coating Thickness Analysers, QuaNix CrashCheck, QNix CrashCheck Paint Thickness Tester, QuaNix Handy, QNix Handy, QuaNix 4200, QNix 4200, QuaNix 4500, QNix 4500, QuaNix 1200, QNix 1200, QuaNix 1500, QuNix 1500, QuaNix 7500, QNix 7500, QuaNix 8500, QuNix 8500, QuaNix KeyLess, QNix KeyLess, QuaNix CarCheck System, QNix CarCheck System, QuaNix Micro-Tri-Gloss With Thickness, QNix Micro-Tri-Gloss With Thickness, Paint Meter Gage Digital Coating Thickness Gauge automotive paint thickness meter | auto paint meter | car paint meter | car paint gauge | car paint gage | paint meter | paint tester | paint gauge | paint gage | paint thickness meter | paint thickness tester | paint thickness gauge | paint thickness gage | coating meter | coating tester | coating gauge | coating gage | coating thickness meter | coating thickness tester | coating thickness gauge | coating thickness gage | coating thickness measurement | measure paint thickness | measure coating thickness | paint meter gauge | paint meter gage | paint meter for cars | best industrial commercial professional tools